🔧 1. Introduction – Ceiling Fan Rewinding Kya Hai?
Rewinding ka matlab hota hai fan ke motor ke andar lage copper coil ko naya wire se dobara lapetna. Is blog mein aapko har ek step simple bhaasha mein samjhaenge.
---
🧰 2. Zaroori Tools aur Samaan!
Fan rewind karne ke liye aapko kuch tools chahiye honge. Neeche diye gaye tools aap online bhi kharid sakte hain.
🔨 Basic Tools List:
1. Copper Wire (30 Gauge) – Rewinding ke liye main wire.
---
2. Multimeter – Continuity aur voltage check karne ke liye.
---
3. Screwdriver Set – Fan kholne ke liye kaam aata hai.
---
4. Insulation Tape – Wires ko secure karne ke liye.
---
5. Hand Winding Tool / Jig – Wire golai ke liye helpful hota hai.
---
💰Approx Cost $5- $7
📘 3. Slot aur Golai Kya Hote Hain?
Slot: Fan ke motor mein bane chhote spaces hote hain jisme wire coil lapeta jata hai. Jaise 16 slots common hote hain ceiling fan mein.
Golai: Golai ya turns ka matlab hai kitni baar wire coil mein ghooma hai. Har fan ka specific turn count hota hai.
📌 Tip: Purane winding ke turns ko likh lo, wahi follow karo.
---
🪛 4. Fan Kaise Kholen? (Asaan Steps)
1. Fan ko current se disconnect karo.
2. Blades ko screwdriver se nikaalo.
3. Canopy aur rod ko alag karo.
4. Motor ke screws khol ke body open karo.
5. Capacitor aur wires ka photo le lo reference ke liye.
6. Purani wiring ko samjho – start aur run coil alag hoti hai.
📸 Har step ka photo lo, baad mein kaam aayega.
---
🔁 5. Purani Winding Ko Kaise Hatayein?
Wire cutter se purani winding kaat do.
Slot se pura wire nikaal lo dhyan se.
Turns count kar lo aur likh lo.
Start aur Run coil ko pehchano.
🧠 Example:
Start Coil: 180 turns
Run Coil: 300 turns (fan ke brand pe depend karta hai)
---
🧵 6. Nayi Wire Se Rewinding Karna
1. Jig pe utne hi turns ki golai banao jitni pehle thi.
2. Coil ko slot mein carefully fit karo.
3. Start aur run coil ko alag-alag direction mein wind karo.
4. Wire ke joints ko insulation tape se achhi tarah wrap karo.
5. Multimeter se continuity check karo – 0-1 ohm aana chahiye.
🔗 Copper Wire: Polycab Copper Wire – 🔗 Multimeter: Sharum DT830D –
---
🧩 7. Dobara Fan Assemble Karna
1. Rewind hone ke baad coil ko sahi se fit karo.
2. Capacitor aur wires ko original jagah connect karo.
3. Fan ki body band karo.
4. Rod aur canopy wapas lagao.
5. Blades fit karke current se test karo.
✅ Agar sab kuch theek hai to fan high speed mein chalega.
---
⚠️ 8. Safety Tips
Hamesha gloves pahno rewinding ke dauraan.
Current test se pehle continuity zarur check karo.
Fan run nahi kare to capacitor bhi check karo.
Dhyan se kaam karo – haste rehna, lekin suraksha pehle!😊
---
🔥 9. Conclusion
Ab aap seekh gaye ho ki ceiling fan rewinding ghar par bhi possible hai. Bas tools ready hone chahiye, thoda patience aur sahi knowledge. Aap khud fan ko repair karke paisa bhi bacha sakte hain aur dusron ka bhi help kar sakte hain.
---
Agar aap kisi specific fan model ka winding chart chahte hain, to comment karke batayein – main zarur update dunga! 💬
Post a Comment
0Comments